How to make a stained glass window. Do-it-yourself film stained glass window: master class with photos. Making stained glass with your own hands

In this article: real look for making stained glass at home:

• what types of stained glass are suitable for making at home
• what tools and materials are needed for the job
• what training courses you can trust, find out course reviews And see the work of beginners
• watch video tutorials on making stained glass at home
• find out where to start

Creating stained glass is an ancient art that was previously available only to select craftsmen, but nowadays it is very possible to make a beautiful stained glass window yourself at home. Of course, you will not make stained glass using medieval technology in this way, but modern materials And modern technologies allow you to create very beautiful compositions that look little different from those very ancient stained glass windows.

Methods of creating stained glass, which ones are suitable.

There are many ways to make stained glass. In some cases, making stained glass is a rather labor-intensive and complex process that requires special equipment, while other methods make it relatively easy to make stained glass with your own hands at home. The word relative is key. Stained glass cannot be made without expense and effort.

As a rule, stained glass windows are classified according to the method of their manufacture and the materials used. Some techniques are not very different from each other, but there are differences in the materials used.

This is the very first stained glass technique, known since the Middle Ages. These stained glass windows are assembled from pieces of glass held in place by metal partitions. This is quite a complex and labor-intensive job that requires special equipment and skills, and besides, such stained glass windows are expensive. They also turn out to be quite heavy, so you can’t install such a stained glass window on any fragile structure. However, as they say, “hunt is greater than captivity,” and such little things cannot stand in the way of creating beauty.

Now you can buy ready-made glass for stained glass in specialized stores. Choosing is a fascinating thing, as the variety of colors and textures can awaken the imagination of even the most conservative person.

However, the cost of such glass is very high, and to produce 1 sq.m of stained glass surface, as a rule, 1.5 - 2 sq.m. are required. glass For the manufacture of lamps, floor lamps, chandeliers, glass with a thickness of 3-4 mm is used, and the thickness is different types glass may fluctuate within one sheet of glass, so it is difficult to calculate the required amount of glass for a product. There will probably be unclaimed pieces of expensive material left.

You can see how easily and simply Svetlana Romanova and Marat Ka make classic stained glass in this video.

Advice from an experienced stained glass artist:

“You don’t need to buy a glass grinder yet,” said the salesman in the store, “at first, just take a whetstone and grind off the sharp edges. Then, when you acquire the skills, buy a machine.

The advice seemed reasonable, but the rather high price of the machine encouraged me to postpone its purchase until later. And we followed this advice.

So, gentlemen, if anyone ever advises you like this, send the adviser to hell. The very first thing a beginning stained glass artist should buy is a glass grinding machine.

Without it, work will turn into torture. Especially at first, when you have not yet learned how to cut glass exactly along the contours and you will have to remove a lot of excess in order to give the curved lines of the parts the exact shape.”

This type of stained glass also includes Tiffany technology, which involves collecting pieces of glass on a copper strip.

At home, you can make stained glass using Tiffany technology, but this will also require the ability to work with glass.

• The work of creating stained glass begins with a sketch. The parts should also not be too small, otherwise they simply cannot be cut out of glass properly.
• The sketch is cut into parts, each part is applied to a sheet of colored glass desired color, after which the part is cut out using a glass cutter.
• Then the edges of the parts will need to be smoothly turned and wrapped in copper foil. When everything is ready, the parts need to be folded into a composition, pressed tightly against each other.
• The edge of the foil must be coated with soldering acid, and then the seams must be joined using tin and a soldering iron. At the end of the work, you will need to wash the stained glass so that there is no residue left on the seams. This can be done using regular detergent.
• The seams will need to be covered with patina, and then washed again, thereby completing the work.

Film stained glass

Making stained glass of such a type best suited for home use, since there is no need to buy special equipment and expensive materials. This is a stained glass window, but on a single piece, the glass does not need to be cut into pieces, no need to be ground, no need to spend money on adhesive plasters, because there will be no cuts on your fingers. The entire design is mounted on solid glass. This could be window glass, a door or decorative panel covering an entire wall, or a tiny decorative element.

To do film stained glass, You will need special film. The leaders in quality available on our markets are English films from Regalead. This is not an ordinary self-adhesive film, it is an amazingly technological imitation of glass, the film consists of a dye located between two durable layers that do not transmit ultraviolet radiation and protect paints from fading, and can also withstand temperatures from -45 degrees to +135 degrees Celsius. Films have an incredible range of colors and textures, and also vary in degree of transparency.

To cut film, you do not need special machines or other devices, although in enterprises or private workshops where they work with a large number of orders they use plotters and digital devices for precise cutting according to the applied pattern. At home, it is enough to have scissors.

And, of course, a special lead tape for connecting pieces of film. And, of course, a good teacher. The artist Irina Kiseleva is one of these, she will tell and show, teach where to get what and how to do it, release electronic journal to help beginners, is engaged in the creation of stained glass windows and training in the creation of stained glass windows professionally.

Fusing

This technique is otherwise called sintering. Pre-cut pieces of multi-colored glass are laid out on a colorless glass base, placed in an oven and sintered together under the influence of glass temperature. Also, other objects can be used to create a pattern, for example, colored sand, which is used to lay out patterns, or wire. Of course, contour images cannot be obtained using this method, but the abstractions are bizarre and beautiful. The technology is attractive, the products are mesmerizingly beautiful, but look at the video to see what equipment is used to make such things.

Sandblasting stained glass windows

The technique for making stained glass of this type is to use air flow and sand. There are three subtypes of this type of stained glass, which differ in the way they use air jets and colored sand.

Etching

Stained glass windows are made using acid. A special protective film is applied to the glass, as well as a stencil with the contours of the design along which the image is melted. Such stained glass windows are made in relief, with three-dimensional patterns. It is worth noting that the technique of working with acid is very dangerous and is therefore rarely used. To avoid being poisoned by acid fumes, artists wear respirators and special clothes. Not suitable for home at all.

Cast stained glass

A complex technique in which each glass module is cast or blown by hand, giving the glass a special texture that enhances the refraction of light and gives expressiveness to stained glass. The glass is fastened together using metal reinforcement and cement mortar.

Painted stained glass

This technique requires the mandatory use of painting. And such a product can be called a stained glass window with great stretch, but nevertheless. The surface of the glass is painted either with acrylic opaque paints and then, after drying, varnished, or painted with expensive silicone transparent stained glass paints, and then the glass is fired in a special oven. Of course, no one wants to burn anything at home.

Filled contour stained glass window

In fact, this is just an imitation of classic stained glass, since it does not require any glass processing. Making stained glass This type is done using special paint. First, an outline is applied that imitates a stained glass frame, and then another layer of paint is poured into the area limited by the outline.

Where to begin?

Choose a drawing, or draw it yourself, go to the store, on the advice of a cheerful salesman, buy a bunch of unnecessary materials and... FAIL THE ENTIRE CASE?

Creating stained glass windows, however, is not the easiest thing. Even the most easy way, film, requires certain knowledge and skills. After all, what a profession is is knowledge of the nuances! So if you want to know, how to make stained glass with your own hands, contact professionals who know professional nuances, do not be fooled by statements about the ease of the process, which does not require preparation, this is not the case.

Go to courses in your city in artists’ workshops, buy special literature, watch video lessons. Although on the Internet enough ridiculous recommendations on making stained glass paints with your own hands, for example.

Therefore, the phrase “turn to professionals” will never lose its relevance. Contact professionals, this will save you Your Time and Your Money.

Artist Irina Kiseleva has been making stained glass for a long time. Her professional activity I started working for a stained glass company. The artist maintains an electronic magazine, where she shares tips with readers, and she also has a training video course, which was created specifically for those who want to learn how to create stained glass.

Training course by Irina Kiseleva reviews

Irina Terekhova presented photos of her works and words of gratitude to the author of the course (information source vse-v-tvoih-rukah.ru):

I liked the poems of M. Tsvetaeva:

“Don’t forbid yourself to create, even if sometimes it turns out crooked, no one can repeat your ridiculous motives!” M. Tsvetaeva

You can view 120 photos with ideas for using stained glass in the interior HERE.

Good luck in your endeavors!

Stained glass is a special decor that enriches and adds value to the interior, making it original and sublime. However, what makes the interior expensive is not only the highly artistic quality of the stained glass products, but also their considerable cost. And this is quite justified, because stained glass is a painstaking creative work, art, and skill in such a matter is highly valued. In this case, reasonable questions arise as to whether it is possible to master this craft on your own and how to make stained glass with your own hands.

DIY stained glass windows - where to start?

Do-it-yourself stained glass windows, naturally, begin with a great desire, and if closer to the point, with the development of a sketch. If speak about classical techniques and their imitations, then the sketches should be:

• full size stained glass on paper and cardboard;
  
  
  
• with clearly drawn contours of details, breaking the drawing into separate figures;
  
  
  
• on cardboard indicating the color and material of each fragment;
  
  
  
• for type-setting stained glass - possibly indicating the direction of the glass fibers and numbering the parts.
  
  
  

In theory this may seem complicated, but in practice it's simpler: appearance complete stained glass diagram is similar to a coloring book for children, on individual parts of which numbers, arrows or other necessary symbols are drawn, which makes it easier to assemble the stained glass window. Depending on the complexity of the design and the technique of making stained glass, more or less of them will be required.

Advice. To save time and effort on developing a sketch and stencil, you can download and print a ready-made stencil for stained glass. To transfer the design to the glass you will need a disappearing marker.

Stained glass manufacturing technology

The manufacturing technology is selected, including, based on what the stained glass object will be: whether the stained glass is planned on a window or on a door, on a mirror or on a vase, or perhaps it will be stained glass lamps or glass paintings. Each individual case will have its own manufacturing and installation features that make a certain technology a priority.

The following three techniques are most suitable for producing stained glass at home:

• Tiffany stained glass;
  
  
  
• film false stained glass;
  
  
  
• contour stained glass window.
  
  
  

They do not require specific expensive equipment, such as a fusing furnace, or the presence of an equipped workshop in connection with working with chemicals, abrasives and harmful fumes, such as, for example, for frosting glass or making stained glass windows using the classic lead-soldering technique.

The Tiffany theme essentially combines all three methods, since film and flood stained glass are ways to imitate classical techniques.

How to make Tiffany stained glass

In short: according to the finished sketch, templates of parts are cut out of cardboard, they are outlined on glass, the parts are cut out with a glass cutter, polished, each element is wrapped with copper foil around the perimeter, all parts are laid out in a single pattern, the position of the edge elements is fixed with nails, the foil at the joints is treated with flux, Soldering is done with tin solder on one and then on the other side of the product, the stained glass window is inserted into a frame made of a metal profile and soldered to it.

At each stage of creating a stained glass window, you should take into account a lot of nuances:

• in the drawing, details with several sharp corners (N-shaped smalts) or sophisticated S-shaped curves are not desirable: soft bends of curved lines are best;
  
  
  
• It is not sheet glass for stained glass that will cost less, but broken glass; cutting glass should be done with a diamond glass cutter, having previously practiced ordinary glass; for curved figures it is necessary to make auxiliary cuts tangentially;
  
  
  
  
  
  
  
• the production of parts and their placement in the pattern is carried out simultaneously: each part, starting from the upper corner, is cut out, sanded, applied to the pattern, wrapped in foil, applied again to the pattern and, after checking, fixed in the appropriate place; It is more convenient to assemble stained glass on a surface illuminated from below;
  
  
  
  
  
• for soldering you need a 100-watt soldering iron with a nickel-plated tip and low-melting tin solder without rosin; To prevent the glass from cracking, you should not solder too large areas at a time, you should let the stained glass window cool, etc.
  
  
  
  
  

DIY stained glass windows, master class:

How to make film stained glass

Making film stained glass is a simpler task than assembling Tiffany stained glass.

1. The glass is cleaned; According to the sketch placed under it, the contour lines are laid out with lead tape. The ends of each line should overlap the next piece of tape. When all the contours are pasted over, the tape is rolled with a roller;
2. The glass is turned over, wiped; elements from the film are cut out along the contours formed by the lead tape, glued to this reverse side and also rolled with a separate film roller;
3. The joints of the films are covered with lead tape, following the contours of the tape on the first side, and rolled with a roller; The finished stained glass window is wiped with detergent.

To decorate false stained glass, you can use real glass parts mounted with special glue.

How to make a stained glass window

For poured stained glass, a polymer contour and stained glass acrylic varnish or special paint are required.

• A sketch is drawn or printed, which is placed under transparent glass or transferred with a disappearing marker onto a matte or mirror base;
• The glass surface is cleaned and degreased;
• A polymer contour is applied according to the drawing, forming closed areas;
• After the outline has dried, each element is carefully filled with liquid paint.

Apply a drop of paint near the outline, without touching it. The paint should not be smeared; it should spread naturally, so that the result is a beautiful stained glass window that plays with light.

DIY stained glass windows, video:

The oldest example of stained glass art that has survived to this day dates back to the 7th century BC. No matter how strange it may sound, the process of creating colored glass is so simple that even children can learn how to create stained glass with their own hands.

Stained glass styles

Over the long period of existence of this type of creativity, the technology for creating glass drawings with your own hands has significantly improved. New types and technological features have appeared.

Having studied all the techniques, you will be able to choose the one you need, each time planning new interesting stained glass windows.

Classic way

The classic technology of creating stained glass with your own hands has survived to this day. The master draws sketches on the main glass, cuts them out, and using these blanks prepares the details of the future composition from colored glass. The particles are inserted into a pre-prepared forged frame.

After installation of colored glass is completed, the iron partition is sealed for greater strength. Ready product is a beautiful picture of large geometric elements with a clearly defined metal outline.

In ancient times, wide openings of buildings were decorated in this way. Stained glass was especially often used to decorate windows in Christian and Muslim churches - the ideas for the designs were taken from biblical and Koranic motifs.

The beauty of the classic method is that it allows you to connect large parts with your own hands. Unfortunately, the design turns out to be quite bulky and heavy, so it is not recommended to use it to decorate the ceiling. In addition, rough metal does not make it possible to create a pattern from small curved parts.

Tiffany stained glass

The improved technology was developed by the founder of the Tiffany jewelry company, Louis Tiffany, at the turn of the 19th and 20th centuries.

He proposed a fairly simple solution, thanks to which the stained glass windows began to look different. Instead of using lead rods, Louis began wrapping glass parts with thin copper strips with his own hands. As a rule, the strip protrudes slightly above the plane of the part.

After drawing up the drawing, the parts are treated with flux to prevent rust and are soldered together. The protruding edge of the copper tape is leveled above the surface of the glass, creating additional protection from parts falling out of the frame.

Thanks to Tiffany's technique, stained glass windows turned into real works of art! Thin filigree patterns consisting of small particles allow you to achieve a smoother color transition and a more natural image.

Tiffany stained glass can be used to create almost any product due to its lightness and beauty.

Fusing glass

The amazing fusing technique allows you to create a wide variety of products - from glass inserts in doors and furniture to painted dishes. But this method is too labor-intensive to make large stained glass windows with your own hands.

The peculiarity of the technique is that colored elements are laid out on top of the main one. clear glass. The workpiece is sent to the furnace, where under the influence of high temperature the parts are fused into each other. This way you get colored glass without iron partition.

Another disadvantage of fusing is that it is difficult to find a kiln in which large products can be placed.

Pseudo-stained glass

Modern technologies have given people the opportunity to create stained glass windows with their own hands without learning the labor-intensive process of forging, metal working and glass cutting.

All you need is a piece of transparent glass of a certain size and a special film with colored patterns that allows light to pass through. There are several types of film:

• self-adhesive - a sticky layer is applied to one side of the material;

• a film that must be attached to the glass using a special colorless glue.

Film stained glass windows help save on interior decoration while maintaining the interesting appearance of the glass.

In addition to the film method, the use of special stained glass paints is also widely used. Transparent gel-like mixtures are applied to the workpiece in the form of a specific pattern. After they harden, the glass takes on the appearance of a transparent stained glass product.

This technology is so simple that recently children’s creativity kits have begun to appear, allowing them to create painted stained glass windows with their own hands.

Tiffany stained glass: master class

Tiffany stained glass is very easy to create even at home. Prepare colored glass fragments, a glass cutting knife, thin copper foil, soldering iron, grinder, flux, soldering tin.

• Create a blank sketch - the more T-shaped connecting lines in the drawing, the tighter the stained glass parts will hold.

• Print 2 copies of the sketch in full size. Number the parts on each sketch and cut one of them along the joint lines.

• The second whole sketch is covered with tape and inserted into a wooden working frame.

After working on the sketch, you can begin preparing the parts.

• Attach the cut out parts of the first sketch to the fragments of a certain color.

• Take the glass cutter and start cutting out the colored element, holding the tool at an angle of 45 degrees relative to the surface. Try to cut the piece in one continuous line, maintaining constant pressure, otherwise you may end up with chips and cracks.

• After the glass cutter, microcracks formed in the glass. With just a tap, you can separate your piece.

• Use a sander to smooth and roughen the edges of the glass before the next steps.

• Now wrap the piece with copper wire. Use folia - a special thin long copper material with one adhesive side.

• Fold and smooth the protruding edges of the foil onto the product.

• Install the finished element in the overall picture using nails driven around it.

• When all the parts are in place, remove the nails and flux the gaps between them.

The preparatory stage is completed - you can start soldering!

• Place the tip of the tin wire over the joint and heat it on top with a soldering iron. In this way, gradually process all the seams with your own hands. Don't keep the soldering iron in one place for too long - you can overheat the foil and glass, as well as melt too much tin.

• After soldering the pattern is complete, remove the wooden frame and bring the iron blanks to the sides of the painting.

• Using tin, solder them to the image where they touch the seams.

Leave the product to cool in a dry, ventilated area for an hour or two. When it reaches room temperature, rinse the painting thoroughly with a sponge, water and non-greasy detergents.

Now your creation can be hung on the wall or placed on a shelf.

Filled stained glass: master class

Try making stained glass windows with your child - your child will surely enjoy the process of non-standard drawing. The main thing is to follow safety rules: after all, your main material - glass - can lead to injuries and cuts.

Prepare stained glass paints - they are easy to find in large office supply stores - and a small square piece of glass. Pre-insert it into a frame with rounded corners to protect the child from sharp edges.

Using dark paint, draw thin sketch lines on the glass with your own hands. The most commonly used color is black. You have formed defined hollow areas. Near the black color, but not on it, drop a few drops of the colored shade - it should spread on its own throughout the cell.

You can create beautiful stained glass windows with your own hands to decorate a candlestick by watching the following video.

Using this technique you can decorate a glass photo frame, a cabinet door or a window in a nursery.

There are several easy techniques for making stained glass at home.

Real stained glass is not cheap, and they are made experienced craftsmen. There are several simple methods for making stained glass at home. A window opening or door with stained glass will add an authentic flavor to the room. Stained glass windows look expensive and, finally, they are simply beautiful.

There are several easy techniques for making stained glass at home. They will not require unusual skills or large financial outlays from you. A pencil sketch of the stained glass window you like is applied to whatman paper or tracing paper. These might be: animal silhouettes, geometric patterns, exotic birds or floral design. Fragments of the sketch are marked with the desired color tone.

Types of technologies for making stained glass

Stained glass can be used in the decoration of a wide variety of interior items. Glass can be inserted into window frames, doors, ceilings, or used as a partition screen or apron in the kitchen. Sometimes mirrors are decorated with stained glass frames.

To create a stained glass window, you will need a palette of translucent and three-dimensional paints, markers for markings and sketches of the design on tracing paper. After completion of the work, the self-leveling stained glass window can be secured with transparent varnish. After heat treatment, the stained glass window becomes moisture resistant.

Tiffany stained glass is a little more difficult to make. The materials you will need are a set of colored glass and stained glass foil. If you have skills in cutting glass and working with a soldering iron, then making a Tiffany stained glass window will not be difficult.

Film stained glass is the easiest to make. Multi-colored translucent self-adhesive film is cut out according to sketches and glued to the glass. Work can be done even on a vertical plane without dismantling the glass. The selection of colored self-adhesive films in construction stores is very large.

The work of making any type of stained glass cannot be rushed and requires attention and scrupulousness.

Manufacturing of stained glass windows

A sketch of a stained glass design on a scale of 1:1 is placed on a horizontally mounted table. Cleaned from dirt and degreased glass is placed on top of the sketch. Relief paint is applied along the contour lines of the design. Tubes of this paint are equipped with nozzles of different diameters, and the color range contains tones similar to the colors of metals. The relief paint is applied along the contour in even rollers, and after drying it forms a side 3–4 mm high.

The contour edging can be made from a special stained glass tape. This is a lead strip on a self-adhesive base in metallized colors. The ribbon can be a natural lead color or imitating copper, bronze, gold plated, etc. The width of the ribbon has different sizes.

Sometimes the edging is made of aluminum wire 2 mm thick. The wire is flattened with a hammer, bent along the contour pattern of the sketch, coated with thick PVA glue and pressed tightly against the glass.

Acrylic paints diluted with water are used for stained glass designs, or colored varnish is prepared. For colored varnish, a little transparent nitro varnish is taken into clean plastic jars and diluted with solvent to a liquid consistency. Add a little oil paint and stir. Colored varnish is poured into the free openings of the stained glass pattern according to the marked markings and left to dry in a horizontal position. The tone and thickness of the layer of colored varnish is selected depending on the desired light transmission of the stained glass.

Aniline or acrylic paints diluted with water with the addition of PVA emulsion. The paint is applied in strokes, from the outline of the fragment to the middle. After the first layer has dried and the color saturation has been adjusted, the stained glass fragments are finally filled.

The stained glass window is coated with transparent varnish, and when installed in the frame, a rubber seal is used.

Technology for stained glass "Tiffany"

Two sketches of a stained glass drawing are being prepared. The fragments on them are numbered and color coded. One of the sketches is cut along the contour lines into fragments. The cut out elements will serve as a template for cutting colored glass.

Technical supply stores or art stores sell sets of colored glass for Tiffany stained glass windows. They have different thickness, texture and color density. It is advisable to purchase glass of uniform quality and always the same thickness. Edging copper foil - folia - is also purchased there. Folia - a strip of copper foil with a one-sided adhesive surface. Depending on the type of patina chosen, black or copper foil is purchased.

Fragments of a sketch of a stained glass window cut out of paper are glued onto colored glass. The elements of the design are cut out using them using a glass cutter. Using a grinding machine, the part is adjusted to size and the chamfer is removed. Glass elements are degreased and blotted dry with a napkin. Each piece is wrapped in foil.

A second whole sketch of the stained glass window is placed on a sheet of thick plywood. Elements of stained glass are laid out on it, starting from the corner. Along the outer perimeter, the stained glass window is fixed with strips or baguette slats. The laid out several elements are nailed and soldered.

The seams are treated with flux, and tin solder is evenly distributed over them with a hot soldering iron. The wooden slats around the perimeter are removed and the stained glass window is edged with a U-shaped frame profile. The contact points of the profile and seams are secured by soldering for strength.

A fully soldered Tiffany stained glass window reveals a patina at the seams. The patina solution is applied with a sponge. Stained glass is cleaned with glass cleaner and installed in the frame.

The simplest film stained glass windows

To make stained glass from self-adhesive film you will need:

• a set of translucent multi-colored adhesive film;
• lead stained glass tape;
• scissors;
• stationery knife;
• sketch;
• marker.

Work can be done even with the glass in a vertical position. Dirt is removed from the glass and wiped with a degreasing solvent. In accordance with the pattern, stained glass fragments are cut out of film of different colors. A sketch of a stained glass window is glued to the opposite side of the glass using double-sided tape.

Along the lines visible through the glass, a relief rim made of lead flexible tape is glued. The joints of the contour side can be soldered. Colored pieces of film are glued into the free openings. The film is applied in the central part of the fragment and smoothed to the edges of the contour. Excess film is trimmed with a sharp stationery knife. The air sinuses that appear when gluing the film are pierced with a needle and smoothed out with your fingers.

Conclusion

Home-made stained glass is difficult to distinguish from factory-made glass. Be careful and patient when working. It is recommended to place stained glass for windows on the south side of the house. In this case, they look more beautiful when exposed to light and “steal” little sunlight. published

Reading time ≈ 3 minutes

A colorful stained glass window can decorate a living room, a bedroom, or a corridor. Ordering such products is too expensive, but you can make similar decor for your home yourself. A stained glass window of any complexity can be created with your own hands without any special problems: the artist needs high-quality glass, paints, and sealant. The step-by-step instructions below will tell you in detail about the rules for making stained glass.

Materials for creating illuminated stained glass windows

The basis of the work is glass, but its choice must be approached very carefully. The surface of the material must be perfectly flat; the presence of air bubbles or waves is unacceptable. The selection of other components for work should be approached no less responsibly: the result obtained depends on their quality. In order to make stained glass on glass, you will need the following tools and materials:

• Whatman paper (must correspond to the size of the decor being made);
• glass;
• stained glass paints;
• black silicone for aquariums (can be replaced with rubber sealant);
• wooden blocks (for the frame);
• corners;
• LED cord, fasteners and power cord with adapter.

After purchasing all the elements, you can safely start making bright home decor.

How to make a stained glass window from ordinary glass?

You should not do many elements, especially if such a task is being performed for the first time. After receiving a beautiful sketch, the following work is carried out:

1. The pencil drawing is outlined with a thick marker for ease of subsequent transfer of the image.

2. Glass is placed on top of the paper, whatman paper is fixed to the glass with tape.

3. The sealant is prepared: the sharp nose is cut off, as shown in the attached video tip. This will help you draw lines more accurately and conveniently.

4. The pattern is transferred to the glass.

5. The image is colored using stained glass paints along the prepared contours.

To obtain the most beautiful and “lively” stained glass window, it is recommended to use additives when applying paints, dilute one color with another, and lighten areas. All these techniques are demonstrated in a master class on making stained glass at home. The finished decor shows how original and bright the play and shade transitions look.

Preparing a frame and decorating a room with stained glass

The dimensions of the frame are determined according to the dimensions of the glass itself: it will be glued directly to the wooden frame. To securely connect the beam, you need to saw it in the corners to get a reliable lock between adjacent elements. Next, drill holes at the joints and hammer dowels into them.

After assembling the frame, it is sanded and painted.

It is secured along the inner side using plastic duralight fasteners.

Once fixation is complete, it is connected to the power cord with an adapter. The glass is glued to the frame, the glass is additionally fixed at the front with metal corners, and metal fasteners for dowels are installed on the frame at the back. On at this stage The stained glass window will be completely ready for installation.